The ePurge X Purge Controller
The next generation of purge
Item not yet available.
The ePurge X ensures a safe area inside of an enclosure by purging and pressurizing the internal volume.
This solid state device stands out from other offerings by virtue of an ultra-slim installed profile and smart utility-saving behavior.
Using utility air or inert gas, the ePurge X continuously purges one or more enclosures.
- Protrudes less than an inch from enclosure surface
- Bright status indicator LEDs
- Differential pressure sensor prevents overuse of purge gas to cut utility consumption
- Dry-contact relay for signal transmission
SPECIFICATIONS
GENERAL PERFORMANCE
OPERATING CONDITIONS
HARDWARE
| Purge Verification | Digital mass flow sensor verifying purge gas cycle (equaling 5x enclosure volume) |
| Calibration | Factory calibrated; re-calibration requires simply inputting new target enclsoure dimensions |
| Purge Gas | Instrument compressed air |
OPERATING CONDITIONS
| Purge Pressure | Minimum: 4 bar (60 psi) Maximum: 8 bar (115 psi) |
| Operating Temperature | -20 °C to 55 °C |
HARDWARE
| Dimensions | 6.5" L x 3.75" W x 3.06" D Surface Protrusion: 0.74" |
| Wetted Materials | Stainless steel 316L & anodized aluminum |
| Hazardous Area Classification | NEC: Class 1, Division 1, Groups C, D IEC: Zone 1, Group IIB |
| Power Consumption | 7 watts (maximum) |
| Alarm Output | Dry-contact relay signal & LED indicator |